Ontario Ambient Air Quality Criteria: Current Levels, Update Dates and Who Sets Them

Ontario Ambient Air Quality Criteria

Ontario’s Ministry of the Environment, Conservation and Parks (MECP) sets the province’s Ambient Air Quality Criteria (AAQCs). These benchmarks help environmental professionals assess outdoor air quality from all sources combined. Ontario’s official AAQC webpage was last updated on July 10, 2025. The province’s downloadable criteria dataset was last updated and validated on September 21, 2023. Neither record identifies a list-wide change to concentrations on those dates. Ontario’s AAQC list · Ontario Data Catalogue

Key takeaways

  • Use the averaging period and unit that go with each value. Ontario’s ozone criterion is 80 ppb over one hour. The benzene criteria are 2.3 µg/m³ over 24 hours and 0.45 µg/m³ annually. Ontario’s AAQC list
  • Sulphur dioxide has three criteria. Ontario lists 67 ppb over 10 minutes, 40 ppb over one hour and 4 ppb annually. Ontario’s air quality report
  • Use the benchmark that fits the assessment. AAQCs are non-regulatory benchmarks for ambient air. For facility compliance, check the applicable requirements under Ontario Regulation 419/05 and the facility’s approval conditions. Ontario’s AAQC list · Ontario Regulation 419/05

What are the current Ontario air quality criteria?

The table gives selected values for common monitoring and assessment parameters. The full provincial list includes additional contaminants, the basis for each criterion and notes on how to apply it. Full Ontario AAQC table · Downloadable criteria dataset

ContaminantAveraging periodOntario AAQC
Ozone (O₃)1 hour80 ppb (165 µg/m³)
Nitrogen dioxide (NO₂)1 hour400 µg/m³
Nitrogen dioxide (NO₂)24 hours200 µg/m³
Sulphur dioxide (SO₂)10 minutes67 ppb
Sulphur dioxide (SO₂)1 hour40 ppb
Sulphur dioxide (SO₂)Annual4 ppb
Carbon monoxide (CO)1 hour30 ppm (36,200 µg/m³)
Carbon monoxide (CO)8 hours13 ppm (15,700 µg/m³)
Benzene24 hours2.3 µg/m³
BenzeneAnnual0.45 µg/m³
Inhalable particulate matter (PM₁₀)24 hours50 µg/m³ (interim)
Suspended particulate matter24 hours120 µg/m³
Suspended particulate matterAnnual60 µg/m³ (geometric mean of daily measurements)

Sources for the table: MECP criteria table (PDF) · Ontario’s air quality report

Ontario lists national benchmarks for fine particulate matter (PM₂.₅). The Canadian Ambient Air Quality Standards (CAAQS) are 27 µg/m³ for the 24-hour metric and 8.8 µg/m³ for the annual metric under the 2020 standards. The 2030 standards lower these to 23 µg/m³ and 8.0 µg/m³, respectively. Both metrics use three years of data and have prescribed calculation methods. Ontario’s wildfire smoke and air quality reference · Canadian Council of Ministers of the Environment

When were the criteria updated, and what changed?

The July 2025 date applies to Ontario’s webpage, which still gives a 2020 suggested citation for the criteria document. The September 2023 date applies to the downloadable dataset. The public records do not provide a change log that ties either date to specific numerical revisions, so the date a criterion changed should come from a contaminant-specific decision where available. Ontario’s AAQC list · Ontario Data Catalogue

One documented revision is Ontario’s March 2018 sulphur dioxide decision. Ontario introduced a 10-minute health-based criterion, lowered the one-hour criterion to address respiratory effects and lowered the annual criterion to protect sensitive vegetation. The current list gives the resulting ambient benchmarks in ppb and lists no 24-hour SO₂ criterion. The same decision also changed separate regulatory air standards for industrial sources. Environmental Registry decision · SO₂ technical decision document · MECP criteria table (PDF)

Who manages the criteria and how are they used?

MECP develops and publishes the criteria. Its Human Toxicology and Air Standards Section, within the Technical Assessment and Standards Development Branch, is the technical contact. Environmental professionals use AAQCs in environmental assessments, community air monitoring studies and provincial air quality reporting. In project reporting, record the contaminant, concentration unit, averaging period and any calculation required by the benchmark. For example, Ontario specifies a geometric mean for annual suspended particulate matter. Ontario’s AAQC list and technical contact · MECP criteria table (PDF)

Glossary

Ambient air — Outdoor air in the surrounding environment.

Ambient Air Quality Criterion (AAQC) — An Ontario concentration benchmark set to protect health, the environment or both.

Averaging period — The time span a concentration represents, such as one hour, 24 hours or a year.

CAAQS — Canadian Ambient Air Quality Standards. Each combines a numerical value, an averaging period and a specified statistical method.

µg/m³, ppb and ppm — Micrograms per cubic metre, parts per billion and parts per million. Conversion between mass and volume units for gases depends on the substance and reference conditions.

Frequently asked questions

Does exceeding an AAQC establish a facility compliance breach?

An exceedance flags a result for assessment. The applicable regulatory standard and any facility-specific requirements determine whether a facility is in breach. Ambient results may reflect contributions from several sources. Ontario’s AAQC list · Ontario Regulation 419/05

Can I compare a single 24-hour PM₂.₅ result with the national standard?

You can use the numerical value as a screening reference if you label the comparison clearly. A formal CAAQS assessment uses the three-year average of the annual 98th percentiles of daily 24-hour concentrations. MECP criteria table (PDF) · Canadian Council of Ministers of the Environment

Where can I get the complete list for a monitoring program?

Use Ontario’s official table to check the contaminant name, averaging period, units and notes. The Ontario Data Catalogue provides a CSV for use in data management workflows. Official criteria table · Download the CSV

Applying environmental guidelines in ESdat

ESdat has recently compiled updated standards across North America, Europe, and Australia. These updates let teams apply current guideline values to monitoring results, automate compliance checks and exceedance alerts, and use the applicable benchmarks in reporting and decision-making workflows. ESdat Environmental Standards

Recommended Reading on Air Quality

Ontario’s Soil, Groundwater, and Sediment standards- O.Reg 406 (Excess Soil Quality) & O.Reg 153 Updates
Environmental Compliance Insights: Key Statistics and Trends Across the US, Canada, UK, and Australia
What are Canada’s environmental guidelines and policies?
What is Australia’s National Environment Protection (Ambient Air Quality) Measure (AAQ NEPM)?
Environmental Compliance Software for Monitoring Data and Reporting
Environmental Data Management: Spreadsheets vs Environmental Data Management Software (EDMS)

Leave a Reply

Your email address will not be published. Required fields are marked *